Xerox 4595 Copier/Printer User Guide
2-82
2. Copy
Copy Output - Stapling Screen
You can select the stapling position other than displayed on
Finishing screen.
KEY POINT: In the following cases, the staple direction appearing
on the screen and the direction in which staples are actually
stapled differ:
a) When the document is placed in the direction it is read (top side
up) and one staple was stapled on the top left.
b) When the document is placed in the left direction (left side up)
and one staple was stapled on the top left.
1. From the Finishing screen, in the Staple Position area,
select More.
2. Make a selection.
3. Select Save to keep your choice.
îš„ None
Stapling is not performed.
îš„ 1 Staple
You can select one position for stapling.
îš„ 2 Staples
You can select two position for stapling.
To Next Page
Loading...
Need help?
General