Xerox 4595 - Deleting Stored Programs

Xerox 4595 Copier/Printer User Guide
6-5
6. Stored Programming
5. The steps are stored. Select Close. You may wish to rename
the Stored Program. See “Naming/Renaming a Stored
Program” on page 6-6 for more information.
Deleting Stored Programs
This is the procedure for deleting a registered Stored Program.
1. From the All Services screen, select Setup Menu and then
Stored Program. Select Delete.
2. Select the number to delete.
NOTE: Select to display the previous screen and select to
display the next screen.
3. Select Yes.
4. The steps are deleted. Select Close.
 Yes
Deletes the Stored Program.
NOTE: Deleted Stored Programs cannot be restored.
 No
The Stored Program delete operation is cancelled.