Xerox 4595 Copier/Printer User Guide
13-8
13. Safety Information and Notices
Regulatory information for RFID (US)
This product generates 13.56 MHz using an Inductive Loop
System as a Radio Frequency Identification system Device
(RFID). This device meets the FCC Part 15C Unlicensed Modular
Transmitter Approval requirements set forth in Public Notice
DSA00-1407.
Safety extra low voltage approval
This Xerox product is in compliance with various governmental
agencies and national safety regulations. All system ports meet
the Safety Extra Low Voltage (SELV) circuits for connection to
customer-owned devices and networks. Additions of customer-
owned or third-party accessories that are attached to the press
must meet or exceed the requirements previously listed. All
modules that require external connection must be installed per the
installation procedure.
To Next Page
Loading...
