Xerox 4595 User Manual

Xerox 4595 Copier/Printer User Guide
4-66
4. Mailbox Management
4. Select the Paper/Output tab:
5. Select Save to Mailbox from the Job Type menu.
6. Enter your Mailbox Number, Password and then select OK.
NOTE: There are considerations and limitations when sending
jobs to the mailbox for printing.
• Settings, such as finishing, that are grayed-out on the print
driver (as shown below) must be set at the mailbox.
• Default printer driver settings that are grayed-out are not sent
with the job to the mailbox. An example of this is if your default
print driver setting is 2 Sided Print; that setting would be
ignored at the print driver and two-sided printing would have to
be selected at the mailbox print settings.
• Some settings, such as paper size, cannot be changed at the
mailbox if they have been selected on the print driver dialog.
• A full suite of features may not be available when printing jobs
from the mailbox, including: watermarks and annotations.
7. Select OK to send your job to your mailbox. From your
mailbox, select your job and adjust features as needed.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English