Xerox 4595 - Page 326

Xerox 4595 Copier/Printer User Guide
9-16
9. Machine Status
Reset Job Counters
You can reset the cumulative counts of scanned and printed
pages for each job.
This appears when the UserID for System Administration mode is
set and you have entered from User Mode in System
Administration mode.
1. Press the Log In/Out button.
2. Enter the UserID with the numeric keypad, and select
Confirm.
NOTE: You may have to contact your System Administrator for
the correct UserID.
3. Select User Mode.
4. Press the Machine Status button.
5. Select the Billing Meter/Print Report tab.
6. Select Reset Job Counters.
7. Make a selection.
 Reset
You can reset the counts for each feature. To reset, in the
confirmation screen that appears, select Yes.