Xerox 4595 - Page 368

Xerox 4595 Copier/Printer User Guide
11-6
11. Problem Solving
Copies are not
made at the
desired size.
Is the document scanning
glass or the document cover
dirty?
Clean the document feeder glass or the
document cover.
Refer to “Cleaning the Document Cover
and Document Glass” on page 10-18.
Is the document made of
highly transparent material
like a transparency?
Place the document on the document
glass, and place a white sheet on top of the
document before making a copy.
Is the document at the
correct position?
Load the document correctly.
Refer to “Step 1 Load Documents” on
page 2-1.
Is the document loaded
correctly?
Is the document guides at
the correct position?
Properly set the document guides.
Refer to “Step 1 Load Documents” on
page 2-1.
Is the document folded or
bent?
Straighten and properly reset the
document.
Refer to “Step 1 Load Documents” on
page 2-1.
Is the document a
non-standard size?
Enter the document size.
Refer to “Original Size” on page 2-34.
Symptoms Check Remedy