Xerox 4595 User Manual

Xerox 4595 Copier/Printer User Guide
11-21
11. Problem Solving
Cause The port is not enabled.
Action Enabled the port in use.
For information about network settings, refer to the
System Administration Guide.
Cause Insufficient space available on the hard disk.
Action Delete unnecessary data to increase free space.
Cause The printer is connected to multiple computers.
Action Wait for a while, and then try printing again.
Sent to printer Cause Out of paper.
Action Supply paper to the printer.
Cause No paper for the specified paper size.
Action Set paper for the specified paper size.
Refer to “Load paper in Trays 1 and 2” on page 7-4,
or “Load paper in Tray 5 (Bypass)” on page 7-6.
Cause Copy operation is performed during interrupt, and
interrupt is performed.
Action Cancel the interrupt operation.
Cause An error occurred with the printer.
Action Check the error details.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English