Scanning
WorkCentre 7120 Multifunction Printer
User Guide
131
Scanning to a Home Directory
The Scan to Home feature allows you to scan a document to your home directory. The network
location of your home directory is defined by the system administrator.
Note: This feature must be configured by the system administrator.
To use the Scan to Home feature:
1. Load the original on the document glass or in the document feeder.
2. On the control panel, press the Services Home button.
3. Touch Network Scanning.
4. Touch the template created by your system administrator.
5. The template defines the scan settings as well as the destination of the image. To change any of
the scan settings, touch the four menus at the bottom of the touch screen: Color Scanning,
2-Sided Scanning, Original Type and Scan Presets. For details, see Setting Scan Options on
page 133.
6. Press the green Start button.
For details, see the System Administrator Guide at www.xerox.com/office/WC7120docs.
To Next Page
Loading...
