Xerox WORKCENTRE 7120 - Assigning a Network Address

Installation and Setup
WorkCentre 7120 Multifunction Printer
User Guide
41
2. Open the front cover.
3. Press the main power switch to the off position.
4. Close the front cover.
Assigning a Network Address
If the network uses a DHCP server, the printer automatically acquires a network address. To assign a
static IP address, configure DNS server settings, or configure other TCP/IP settings, see the System
Administrator Guide at www.xerox.com/office/WC7120docs.
wc7120-015
wc7120-014