Copying
WorkCentre 7120 Multifunction Printer
User Guide
96
Basic Copying
To m ake cop ies:
1. On the control panel, press the yellow Clear All button to remove previous copy settings.
2. Load the original document. Use the document glass for single copies or paper that cannot be fed
using the document feeder. Use the document feeder for multiple or single pages.
Document Glass
.
Document Feeder
3. On the control panel touch screen, touch Copy.
• Lift the document feeder cover and place the
original facedown, toward the back-left
corner of the document glass.
• The original must be aligned to the matching
paper size printed on the edge of the glass.
• The document glass accepts paper sizes from
15 x 15 mm (0.59 x 0.59 in.) to
A3/297 x 432 mm (11.6 x 17 in.).
• The document glass automatically detects
standard paper sizes.
• Insert originals faceup, with page 1 on top.
• The confirmation indicator illuminates when
the originals are correctly loaded.
• Adjust the paper guides so they fit against
the originals.
• The document feeder accepts paper weights
from 38
g/m² to 128 g/m² for 1-sided
copying, and 60
g/m² to 128 g/m² for
2-sided copying.
• The document feeder accepts paper sizes
from 125 x 85 mm (4.9 x 3.3 in.) to
A3/297 x 432 mm (11.6 x 17 in.).
• The maximum feeder capacity is
approximately 110 sheets of 80
g/m² paper.
• The document feeder automatically detects
standard paper sizes.
To Next Page
Loading...
