Copying
WorkCentre 7120 Multifunction Printer
User Guide
98
Adjusting Copy Options
This section includes:
• Basic Settings on page 98
• Image Quality Adjustments on page 102
• Layout Adjustments on page 104
• Output Format Adjustments on page 108
• Advanced Copying on page 114
Basic Settings
The Copy tab appears when the touch screen Copy button is touched. Use the Copy tab to change the
following basic settings:
• Selecting Color or Black and White Copies on page 98
• Reducing or Enlarging the Image on page 99
• Selecting the Tray to Use for Copies on page 99
• Specifying 2-Sided Originals or Copies on page 99
• Collated Copies on page 100
• Uncollated Copies on page 100
• Stapling Copies on page 101
• Creasing Copies on page 101
• Hole Punching Copies on page 101
• Creating Booklets on page 102
Selecting Color or Black and White Copies
If the original document contains color, you can create copies in full color, a single color
(monochrome), or in black and white.
To select the output color:
1. Touch Copy on the touch screen.
2. Touch the desired output color:
• Auto Detect: this option detects the color content in the original document, and makes
copies in full color if the original is a color document, or in black only if the original is a black
and white document.
• Color: this option copies in full color output using all four printing colors (cyan, magenta,
yellow, and black).
• Black & White: this option copies in black and white only. Colors in the original are converted
to shades of gray.
To Next Page