December 2006
6-67
WorkCentre M20, 4118, FaxCentre 2218 Family
GP 25
General Procedures and Information
• Width sensor. This is the PBA SUB - DOC width, PL 5.13 Item 10. It is actuated by
the PMO - actuator DOC, PL 5.13 Item 12.
• Regi sensor. This is the PBA SUB - REGI, PL 5.10 Item 9. It is actuated by the PMO
- actuator REGI, PL 5.10 Item 10.
• Scan sensor. It is actuated by the PMO - actuator scan, PL 5.11 Item 21.
• Gate sensor. This is the PBA SUB - gate, PL 5.14 Item 10. It is actuated by the PMO
- actuator gate, PL 5.14 Item 9.
• Door. This is the ELA HOU - cover open switch, PL 5.11 Item 11.
• Duplex sensor. It is actuated by the PMO - actuator duplex, PL 5.11 Item 20.
• Exit open. This is the PBA SUB - exit open, PL 5.13 Item 11.
NOTE: The scan sensor and duplex sensor are mounted on the PBA SUB - DADF,
PL 5.11 Item 19.
2. Select Sensor Test from the DADF diagnostic menu. Press Enter.
3. Use the up and down keys to scroll to the name of the relevant sensor. If the sensor is
good, the displayed state of the sensor will be On or Open.
To Next Page
Loading...
