Xerox WorkCentre M20 - 5.13 DADF Assembly (4 of 5) (M20 F, 2218)

December 2006
5-19
WorkCentre M20, 4118, FaxCentre 2218 Family
PL 5.13
Parts Lists
PL 5.13 DADF Assembly (4 of 5)
(M20F, 2218)
Item Part Description
1 – MEA Unit Support Pickup
Assembly (P/O PL 5.10 Item 31)
(REP 5.1)
2 – Pickup Support (P/O PL 5.13 Item
1)
3 – Decurler (P/O PL 5.13 Item 1)
4 – Spring (P/O PL 5.13 Item 1)
5 – MEA Unit Guide Pickup Assembly
(P/O PL 5.10 Item 31) (REP 5.1)
6 – Guide - M Pickup Upper (P/O PL
5.13 Item 5)
7 019N00795 MEA Unit - Holder DADF Rubber
8 – Guide - M Pickup Lower (P/O PL
5.13 Item 5)
9 – Spring ETC - Torsion DOC (CC2 -
F) (P/O PL 5.13 Item 5)
10 – PBA SUB - DOC Width (P/O PL
5.13 Item 5)
11 140N63151 PBA SUB - Exit Open
12 – PMO - Actuator DOC (P/O PL 5.13
Item 5)
13 – Spring ETC - Clutch (P/O PL 5.10
Item 31)
14 – Bush - 10 - D (P/O PL 5.10 Item 31)
15 – MEC - Clutch Small (Feed) (P/O PL
5.10 Item 31) (REP 5.1)
16 – Bush 6 D (P/O PL 5.10 Item 31)
17 130N01520 MEA Unit - Pickup (REP 5.1)
18 – Roller Feed (P/O PL 5.10 Item 31)
19 – PMO - Bushing Holder (P/O PL
5.10 Item 31)
20 – Bush - M Feed Roller (P/O PL 5.10
Item 31)
NOTE: If necessary, refer to GP 20 for the acronym list and
cross reference lists of more commonly recognised part
names.