Xerox WorkCentre M20 - PL 4.10 Base Frame Assembly

December 2006
5-11
WorkCentre M20, 4118, FaxCentre 2218 Family
PL 4.10
Parts Lists
PL 4.10 Base Frame Assembly
Item Part Description
1 001N00494 ELA HOU - Base Frame
2 – Screw - Taptite (Not Spared)
3 – Screw - Taptite (Not Spared)
4 009N01467 Spring ETC - Torsion
5 017N00212 Foot
6 – Holder Catch CST MC2 (Not
Spared)
7 – IPR - Channel Base Frame (Not
Spared)
8 015N00440 IPR - Ground Plate A (OPC)
(M20F)
9 015N00441 IPR - Ground Plate B (Base)
10 – PMO - Base Frame (Not Spared)
11 – PMO - Bracket Push DEV (Not
Spared)
12 030N00606 PMO - Bracket Side Open
13 – PMO - Cover Front Dummy (Not
Spared)
14 130N01213 ELA M/M - AUD Speaker
15 – Spring ETC - DEVE Rear (Not
Spared)
16 – CBF Harness - OPC GND (Not
Spared) (M20F)
17 127N07300 Fan - DC (Cardinal) (M20F)
– 127N07516 Fan - DC (Cardinal) (4118, 2218)
18 – Spring ETC - DEV Front (Not
Spared)
19 – Holder - M Roller (Not Spared)
20 – Shaft DEV (Not Spared)
21 – IPR - Ground Plate SCF (Not
Spared)
22 152N01991 CBF - Harness-SCF
23 140N62870 PBA Air Temperature
24 – Screw - Taptite (Not Spared)
25 022N01486 Solenoid - Pickup
NOTE: If necessary, refer to GP 20 for the acronym list and
cross reference lists of more commonly recognised part
names.