Xerox WorkCentre M20 - REP 6.1 Unit - LSU

December 2006
4-37
WorkCentre M20, 4118, FaxCentre 2218 Family
REP 6.1
Repairs and Adjustments
REP 6.1 Unit - LSU
Parts List on PL 6.10
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Avoid exposure to laser beam. Invisible laser radiation.
CAUTION
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1. Remove the MEA unit - cover PA exit assembly, REP 10.3.
2. (M20F) Disconnect CN3 from the PBA main, Figure 1.
(4118/2218) Disconnect CN4 from the PBA main, Figure 1.
Figure 1 Connector
1
Disconnect CN3 (M20F)
or CN4 (4118/2218).