E
SPECIFICATIONS
These are given in bold type at each procedure. It is not necessary to leave the section deal-
ing with the procedure in order to look up the specifications.
It is important to note the differences in specifications of models. Where a procedure relates
to more than one model, the main differences in specifications will be shown in the following
table.
WARNINGS, CAUTIONS AND NOTES
Attention is drawn to the various Warnings, Cautions and Notes which distinguish important
information in this manual in the following ways.
The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS
INVOLVED!
WARNING
Failure to follow WARNING instructions could result in severe injury or death
to the machine
operator, a bystander, or a person inspecting or repairing the outboard motor.
CAUTION:
A CAUTION indicates special precautions that must be taken to avoid damage to the out-
board motor.
NOTE:
A NOTE provides key information to make procedures easier or clearer.
Model name 50GETO 60FEHTO 60FED 60FEDO 60FET 60FETO 70BEDO 70BETO
USA and
Canada name
— P60TH C60ER — C60TR — — 70TR
Control system
Remote
control
Manual
control
Remote control
Tilt system Power trim and tilt Manual tilt Power trim and tilt Manual tilt
Power trim
and tilt
Lubrication
system
Oil injection Pre-mixed Oil injection Pre-mixed Oil injection
Model name 75CET 75CETO 75CEHTO 80AETO 90AEHD 90AED 90AET 90AETO
USA and
Canada name
C75TR 75TR P75H — — — C90TR
90TR
B90TR
Control system Remote control
Manual
control
Remote
control
Manual
control
Remote control
Tilt system Power trim and tilt Manual tilt Power trim and tilt
Lubrication
system
Pre-mixed Oil injection Pre-mixed Oil injection
To Next Page
Loading...
