3-14
INSP
ADJ
E
PERIODIC SERVICE
4. When installing the spark plug, clean
the gasket surface, wipe off any grime
that may be on the surface of the plug
and screw in the spark plug to the cor-
rect torque.
NOTE:
If a torque wrench is not available, a good
estimate of the correct torque is a further 1/4
to 1/2 turns b on finger-tightened a spark
plug.
T
R
.
.
Tightening torque:
25 Nm (2.5 m • kg, 18 ft • lb)
GREASING POINTS
1. Apply:
● Water resistant grease
To Next Page
Loading...
