Yamaha F40BWHD - Removing the Flywheel Magnet Assembly

FLYWHEEL MAGNET ASSEMBLY
5-3
E
POWR
REMOVING THE FLYWHEEL MAGNET
ASSEMBLY
Remove:
• Flywheel magnet assembly
Removing steps
(1) Remove the flywheel magnet assem-
bly nut.
A
For USA and Canada
B
Except for USA and Canada
NOTE:
The major load should be applied in the
direction of the arrows. If the load is not
applied as shown, the flywheel magnet
assembly holder may easily slip off of the
flywheel magnet assembly.
(2) Remove the flywheel magnet assembly.
A
For USA and Canada
B
Except for USA and Canada
NOTE:
• The major load should be applied in the
direction of the arrows.
• Apply the load until the flywheel mag-
net assembly comes off the tapered
portion of the crankshaft.
CAUTION:
To prevent damage to the engine or tools,
screw in the universal puller set-bolts
evenly and completely so that the puller
plate is parallel to the flywheel magnet
assembly.
A
B
A B
Flywheel magnet assembly holder
YB-06139/90890-06522
Universal puller
YB-06117/90890-06521