TILT CYLINDER ASSEMBLY
7-25
E
BRKT
TILT CYLINDER ASSEMBLY
DISASSEMBLING/ASSEMBLING THE TILT CYLINDER ASSEMBLY
7 Nm(0.7 m kgf, 5.2 ft lb)
90 Nm(9.2 m kgf, 66.4 ft lb)
61 Nm(6.1 m kgf, 44.0 ft lb)
10 40 mm
3
4
8
7
6
5
10
9
11
12
13
2
1
LT
271
Order Job/Part Q’ty Remarks
1
Power trim and tilt fluid level check bolt
1
2 O-ring 1 8.8×1.9 mm
3 Tilt ram assembly 1
4 O-ring 1 44.8×2.5 mm
5 Free piston assembly 1
6 O-ring 1 38.7×3.5 mm
7 Backup ring 1
8 O-ring 1 38.7×3.5 mm
9Bolt 1
10 Tilt piston assembly 1
11 Tilt cylinder end screw 1
12 Oil seal 1
13 Tilt ram 1
For assembly, reverse the disassembly
procedure.
Not reusable
Not reusable
Not reusable
Not reusable
To Next Page
