Yamaha F40BWHD - Installing the Timing Belt and Sprockets

STATOR ASSEMBLY
5-18
E
POWR
INSTALLING THE TIMING BELT AND
SPROCKETS
1. Install:
• Drive sprocket
• Driven sprocket
2. Install
• Timing belt
Installing steps
(1) Align mark hole of the drive spro-
cket with engine centerline.
(2) Align "=" mark on the driven
sprocket with a "=" on the cylinder
head.
(3) Install the timing belt .
(4) Turn the crankshaft clockwise two times
and make sure the drive sprocket and
driven sprocket are correctly aligned
with the marks.
b
a
1
c
T
R
.
.
Driven sprocket bolt
38 Nm (3.8 m
•
kgf, 28 ft
•
lb)
Flywheel magnet assembly holder
YB-06139/90890-06522
a
b
c
1