Yamaha F40BWHD - Installing the Drive Shaft

DRIVE SHAFT
6-18
E
LOWR
INSTALLING THE DRIVE SHAFT
1. Install:
• Forward gear
(with the tapered roller bearing)
•Pinion gear
• Oil seal housing
2. Tighten:
• Pinion gear nut
NOTE:
Tighten the pinion gear nut with the same
tools that were used for removal.
T
R
.
.
Pinion gear nut
95 Nm (9.5 m
•
kgf, 68 ft
•
lb)
75 Nm (7.5 m
•
kgf, 54 ft
•
lb)