Yamaha XT250X - Page 134

STEERING HEAD
4-50
● Upper ring nut “3”
●
Lock washer “4”
Refer to “CHECKING AND ADJUSTING
THE STEERING HEAD” on page 3-21.
NOTE:
Portion “a” having the large tapered area must
face downward when the lower ring nut is
mounted.
3. Install:
● Upper bracket
● Steering stem nut
NOTE:
Temporarily tighten the steering stem nut.
4. Install:
● Front fork legs
Refer to “FRONT FORK” on page 4-39.
NOTE:
Temporarily tighten the lower bracket pinch
bolts.
5. Tighten:
● Steering stem nut
Steering stem nut
110 Nm (11.0 m•kg, 80 ft•lb)
3
2
1
4
a
T
R
.
.