Yamaha XT250X - Page 235

ELECTRIC STARTING SYSTEM
7-10
10.Check the engine stop switch.
Refer to “CHECKING THE
SWITCHES” on page 7-33.
NG→ Replace the right handlebar switch.
OK↓
11.Check the neutral switch.
Refer to “CHECKING THE
SWITCHES” on page 7-33.
NG→ Replace the neutral switch.
OK↓
12.Check the sidestand switch.
Refer to
“CHECKING THE
SWITCHES” on page 7-33.
NG→ Replace the sidestand switch.
OK↓
13.Check the clutch switch.
Refer to “CHECKING THE
SWITCHES” on page 7-33.
NG→ Replace the clutch switch.
OK↓
14.Check the start switch.
Refer to
“CHECKING THE
SWITCHES” on page 7-33.
NG→
Poor conducting of engine stop switch.
Replace the right handlebar switch.
OK↓
15.Check the entire starting system’s
wiring.
Refer to
“CIRCUIT DIAGRAM” on page
7-5.
NG→
Properly connect or repair the starting
system’s wiring
OK↓
The starting system circuit is OK.