B95W
Introduction
8 / 306
2
02_Einleitung_en.fm - V1.0 - 1.8.17
10
All other staff members referred to below must
• have read these operating instructions and understood their contents.
• be trained in and able to administer first aid.
• be physically and mentally fit for the purpose of carrying out their tasks.
• display knowledge and understanding of national safety regulations for slinging,
moving, and storing the goods encountered at the deployment location.
• be fully familiar with the risks posed by machinery and loads.
• be of the legal minimum age.
Operating personnel must
• have been instructed in the use of the machine.
• have proven their ability to operate the machine to the operating company.
• have been appointed by the operating company to operate the machine.
• be familiar with the country-specific accident-prevention regulations.
• be in possession of the relevant national permit for operating the machine.
• be fully familiar with the risks that arise when working with machinery and
display knowledge and understanding of all safety-related instructions, sources
of danger and safety precautions.
• have received training and instruction concerning what to do in the event of
a malfunction.
• have read through the entire documentation, in particular the operating
instructions, and be capable of applying the information contained therein.
• be familiar with the hand signals for guiding machines.
• operate the machine in such away that they remain fully in control of it even
in the face of dynamic forces.
Maintenance personnel must
• fulfill all the same qualification criteria as the operating personnel.
• know the maintenance points on the machine.
• have proven their ability to perform maintenance work on the machine to the
operating company.
• have been appointed by the operating company to perform maintenance
work on the machine.
• know the country-specific environmental regulations for the disposal of
lubricants. See chapter “Environmental protection regulations”.
• have been instructed in how to carry out the necessary maintenance work by
completing machine and operations training provided by Yanmar or by
someone that has been appointed by Yanmar.
To Next Page
Loading...
