B95W
Operation
07_Bedienung_en.fm - V1.0 - 1.8.17
207 / 306
7
26
7.1.1 Adjustments
Adjusting the driver's seat
Fig. 7-1 Driver's seat
1 Handle for adjusting seat depth
2 Handle for adjustment of seat angle
3 Right arm rest, left arm rest
4 Option: Switch for seat heating
5 Handwheel for lumbar support
6 Handle for tilting backrest
7 Handle for combined height and body weight adjustment
Optional: Lever for weight adjustment
8 Handle for longitudinal adjustment
Operate the horizontal adjustment (8) feature to move the seat into your
preferred position:
Adjustment to the front: Slide the seat forwards.
Adjustment to the back: Slide the seat backwards.
Adjust the seat to the most comfortable height for you (1):
Raising seat: Raise seat until it clicks audibly into place.
Lowering seat: Raise the seat as far as the stop; the seat then sinks to its
lowest position.
Use the tilt adjustment (6) feature to adjust the backrest so it is at the right
angle for you.
The setting for the driver’s weight can be adjusted in 9 stages (increments of
10 kg each).
Use the handle (7) to set the correct weight for you.
If your seat has a lever for body weight adjustment, move the lever to the right
until it reaches the stop.
The weight adjustment automatically switches to the 50 kg position.
To Next Page
Loading...
