Yanmar B95W - Supports; Other Equipment

B95W
Technical data
09_Technische Daten_en.fm - V1.0 - 1.8.17
289 / 306
9
29
9.2.14 Supports
9.2.15 Other equipment
• Load hook integrated in quick-attach system
• Load hook can be screwed onto bucket rod
• Hydraulic hammer
• Auger
• Hammer attachment adapter
• Transvere cutting fitting
• Fork carrier
Tail support legs for attachment of various support plates
Support width 2320 mm
Lift under surface from 230 - 290 mm
Plate size in version Flat 570 x 595 mm
Site 570 x 595 mm
Rubber 485 x 595 mm
Rear support plate
Width 2460 mm
Width 2290 mm (narrow track design)
Front dozer blade
Width 2460 mm
CAUTION
Danger posed by unauthorized modifications
There is a risk of machine damage if unauthorized
alterations are made to the design, additional equipment,
and work attachments of Yanmar products.
Z Alterations must be approved by the manufacturer in writing.
If that does not succeed, our warranty as well as our product
liability for potential damages are void.