B95W
Maintenance
112 / 306
6
06_Wartung und Pflege_en.fm - V1.0 - 1.8.17
20
6.2 Care and cleaning
Due to varying working conditions, the vehicle should also be cleaned if it becomes
dirty.
Neither a steam-jet appliance nor a high-pressure cleaning apparatus may be
used for cleaning during the first two months after the machine has been
used for the first time, or when newly painted, to ensure that the paint can
harden sufficiently.
For cleaning, stop the engine and turn off the battery isolator switch.
Always wear a helmet with full face protection and suitable protective clothing
when working with high-pressure cleaning devices.
For cleaning purposes, park the machine on a washing area equipped with
an oil separator.
Place the loading equipment flat on the ground.
Secure the loading equipment to prevent it moving.
Put the machine into the parking position. Uppercarriage in the driving position.
Do not use aggressive detergents to clean the machine. We recommend
using commercially available cleaning agents for passenger cars.
Clean the machine from the ground up with suitable cleaning tools (e.g.,
high-pressure cleaning device, telescopic scraper for glass).
For cleaning purposes, park the machine on a washing area equipped with
an oil separator.
Danger of small components spraying outwards
Materials may spray out and get in your eyes.
Risk of serious injury.
Z Wear personal protective equipment (helmet and full face
protection).
Environmentally hazardous substances
Environmental damage caused by environmentally
hazardous substances.
Z Do not allow waste oil to seep into the ground.
Z Always place a receptacle for the collection of waste oil
under the working area (when draining oil or removing the
filter element).
Z Collect the waste oil and dispose of it according to
regulations!
To Next Page
Loading...
