B95W
Transport
268 / 306
8
08_Transport_en.fm - V1.0 - 1.8.17
27
8.3 Loading the machine onto a truck
Fig. 8-6 Loading onto a truck
Connect a loading ramp to the vehicle (max. angle 15°).
Reverse the machine slowly in the lowest gear onto the vehicle. Ensure the
support plate faces in direction of travel and the loading equipment against
direction of travel.
Shut down the engine.
Carefully lash the machine to the lashing points provided so that it is ready
for transport. See chapter 8.4 “Transporting the machine”.
Secure the vehicle to be loaded with chocks to prevent it rolling away.
Danger due to heavy load
The machine may move unexpectedly. Risk of serious
injury with fatal consequences.
Z Use wedges to prevent the machine from rolling.
To Next Page
Loading...
