B95W
Maintenance
128 / 306
6
06_Wartung und Pflege_en.fm - V1.0 - 1.8.17
20
6.6.3 Inspection plan
Work to be carried out by trained dealer service personnel
Notice
Perform all inspection work at operating temperature of the machine.
If the prescribed diesel fuel and engine oil are used, the following
intervals apply.
No. Inspection Hours in operation
Page
o = Check, maintenance
x = Replace
After
100
every
500
every
1000
every
3000
at least
2 x year
at least
1 x year
1 Check machine for presence of
machine-specific operating
instructions
oo --
2 Changing engine oil x
1)2)
x 135
3 Change the engine oil filter. x
1)2)
x 136
4 Fuel pre-filter – empty the water
collection tank. If warning system
starts, empty immediately.
o x 154
5 Replace the fuel pre-filter x x 154
6 Changing the fuel filter x x 156
7 Drain water from fuel tank. o o o 158
8 Check suction pipes for damage
(if damaged, replace)
o o 143
9 Replace air filter main cartridge according to the maintenance
indicator
x 145
10 Replace air filter safety cartridge as required
1)6)
146
11 Clean cooling fins of the cooler
In case of visible dust, shorten
the cleaning intervals
o o o 139
12 Checking antifreeze level in coolant o o 138
13 Replace coolant
as required
6)
140
14 Check / replace belts alternator and
tensioning roller
o x 159
15 Check V-belt, replace if necessary
(only applies to AC option)
ox --
16 Tighten engine mounting (if
required), (replace if damaged)
o--
To Next Page
Loading...
