B95W
Maintenance
06_Wartung und Pflege_en.fm - V1.0 - 1.8.17
133 / 306
6
20
6.7.2 Engine
• Carefully clean around the components in question.
• Dry any wet spots using compressed air.
• When using lubrication oils, adhere to safety procedures and country-specific
regulations.
• Dispose of any leaked lubrication oil and filter elements in accordance with
regulations. Do not allow waste lubrication oil to seep into the ground.
• Carry out a test run after each maintenance task. When doing so, pay
attention to the lubrication oil pressure and any leaks. Finally, check the
engine oil level.
• Ensure that everything is spotless.
Danger posed by hot oil and machine parts
Risk of burns.
Z Switch off the engine.
Z Avoid skin contact with oil, grease, and hot machine parts.
Z Wear personal protective equipment.
Z No smoking, no open flames.
Z In the event of injuries, seek medical attention.
Danger posed by environmentally hazardous
substances
Waste oil can be discharged into the environment and
cause considerable environmental damage.
Z Do not allow waste oil to seep into the ground.
Z Always place a receptacle for the collection of waste oil
under the working area (when draining oil or removing the
filter element).
Z Collect the waste oil and dispose of it according to
regulations.
Notice
Pay attention to the information contained in the manufacturer’s
operating instructions!
To Next Page
Loading...
