B95W
Safety
38 / 306
3
03_Sicherheit_en.fm - V 0.1 - 1.8.17
46
Also consider all working movements of the machine, e.g., positions of the
work equipment and the dimensions of attached loads.
Consider also uneven ground which could cause the machine to slant and
thus bring it closer to the overhead power lines.
While working in windy conditions, note that both overhead lines and loading
equipment may swing out, thus reducing the safety distance.
If it is impossible to maintain a sufficient distance from overhead power lines and
trolley wires, the plant operator must consult the proprietor or operator of the
overhead lines to identify other safety precautions that will prevent current
overspill. Such measures could include:
• Switching off the current
• Re-routing the overhead line
•Wiring
• Limitation of the working range of the machine
3.17 Operating in enclosed spaces
If machines are to be used in enclosed spaces, these areas must be sufficiently
ventilated and special regulations observed.
3.18 Working height restrictions
When operating the machine in
• enclosed spaces,
• under facades,
• and under high-voltage lines
the working height may be restricted. Avoid causing damage by maintaining
sufficient distance.
To Next Page
Loading...
