B95W
Operation
07_Bedienung_en.fm - V1.0 - 1.8.17
231 / 306
7
26
7.4 Switching off the machine (parking)
If possible park the machine on solid and level ground.
Lower the loading equipment to the ground by supporting it on the dipper.
Lower the dozer blade/support device.
Put the machine into the parking position (the uppercarriage in driving position).
Return the manual throttle lever to the low idle position.
Relieve any residual pressures.
Put the travel direction pre-selection switch into neutral.
Engage the parking brake.
Switch the working hydraulics off on the keypad.
Shut down the engine and pull out the ignition key.
Put the exit barrier in an upright position.
Lock the windows and the doors.
If necessary, flick the main battery switch to “zero”.
Danger due to heavy load
Machine may move unexpectedly.
Danger of serious injuries with fatal consequences.
Z Use chocks to stop the machine from rolling away.
To Next Page
Loading...
