B95W
Maintenance
148 / 306
6
06_Wartung und Pflege_en.fm - V1.0 - 1.8.17
20
6.7.5 Fuel system
• When filling up or handling the fuel system, ensure it remains spotless.
• Carefully clean around the components in question.
• Dry any wet spots using compressed air.
• When handling fuel, adhere to safety procedures and country-specific
regulations.
• Dispose of any leaked fuel and filter elements in accordance with regulations.
Do not allow fuel to seep into the ground.
• When first commissioning the machine, or after maintenance work has been
carried out or the tank has run empty, bleed the fuel system, See chapter
“Bleeding the fuel system”. It is vital that you again bleed the fuel system
through a five minute test run, with little or no load.
• Ensure that everything is spotless. Before beginning work, thoroughly clean
and dry the engine and engine compartment. Cover any dirty areas in the
engine compartment with new, clean foil. Prevent the fuel system from
coming into contact with any air pollution (e.g., dust, dirt, damp).
• Ensure the fuel system is closed and has no leaks. Perform a visual
inspection for leaks/damage to the system.
Danger posed by fuel
Fuel and fuel fumes are harmful to health and there is a risk
of ignition.
Z Switch off the engine.
Z Wear personal protective equipment.
Z No smoking, no open flames.
Z Do not wear loose clothing.
Z Take care around hot fuel.
Notice
Refueling with AdBlue®. See chapter 6.7.7 “AdBlue® system”.
Notice
Fold down/fold up maintenance ladder. See chapter 6.7.5 “Fuel system”.
To Next Page
Loading...
