Yanmar B95W - Inspection Intervals and Planning

B95W
Maintenance
114 / 306
6
06_Wartung und Pflege_en.fm - V1.0 - 1.8.17
20
6.3 Inspection intervals
Tab. 6-1 Inspection intervals
Notice
The reading from the operating hour meter in the dashboard is
decisive for the inspection intervals of the machine. See chapter 5.3.2
“Control panel”.
Interval Description Page
Initial Inspection Once before starting up for the first
time
124
Daily tasks Every 10 operating hours or every
shift
1)
125
Weekly tasks Weekly or after 50 operating hours
1)
127
100 operating hours Once after first commissioning
2)
128
Every 500 operating hours After every 500 operating hours 128
Every 1000 operating hours After every 1000 operating hours 128
Every 2000 operating hours After every 2000 operating hours 128
1)
The first date always applies.
2)
Also applicable if new or overhauled engines are put into operation.