B95W
Maintenance
118 / 306
6
06_Wartung und Pflege_en.fm - V1.0 - 1.8.17
20
Tab. 6-2 Fuels, lubricants and coolants
Application Designation
Specification, standards,
quality
Remark
Shutdown Diesel fuel EN 590 (sulfur content
<10mg/kg)
ASTM D975 1-D S15
ASTM D975 2-D S15
(sulfur content < 15 mg/kg)
See also engine manufacturer's
operating instructions
Engine DEF, AdBlue
®
Carbamide solution 32.5%
DIN70070/ISO22241-1/
ASTM D 7821
See also engine manufacturer’s
operating instructions
Do not dilute the carbamide
solution with water or use a
solution with a carbamide
concentration of lower than
31.8 percent by weight.
Shutdown Engine oil DQC III LA
DQC IV LA
See also engine manufacturer's
operating instructions
Engine
cooling
system
Coolant Antifreeze based on
ethylene glycol
See also engine manufacturer's
operating instructions
Hydraulics Hydraulic oil or
multi-grade
engine oil
HVLP 46 or
SAE 10W-40
The following viscosity limit values
must be observed (according to
ASTM 445):
at 100 °C min 8 mm
2
/s (cSt)
at -10 °C approx. 1500 mm
2
/s (cSt)
Biodegradable
hydraulic oil
based on
synthetic ester
Filling according to
customer specifications.
Brand label on machine.
Do not mix biodegradable
oils from different
manufacturers.
The same viscosity values apply as
for mineral hydraulic oils.
When changing from mineral to
biodegradable hydraulic oils, the tank
and system must be completely
drained, cleaned and flushed.
Before changing, please ask your
Yanmar dealer for further details.
Axles,
Gearbox
unit
Transmission
oil
SAE 85W-90LS
API-GL 5
Alternative recommendations
SAE 90LS
Lubricating
points
Multi-purpose,
lithium soap-
based grease
K2K-30
DIN 51825
To Next Page
Loading...
