Yanmar B95W - Page 183

B95W
Maintenance
06_Wartung und Pflege_en.fm - V1.0 - 1.8.17
181 / 306
6
20
Front axle, rear axle B95W AL
Checking the oil level
 Turn the wheel hub to the inspection position.
 Remove the screw plug (1), check the oil level and fill with oil if required.
Oil change
 Turn the wheel until the screw plug (1) on the hub is at the bottom.
 Unscrew the screw plug and catch the oil.
 Flush, if necessary.
 Turn the wheel to the filling and inspection position.
J The inspection mark must be in a level position.
 Pour in the oil up to the lower edge of the opening.
 Carefully seal the filler opening.
Rear axle (except B95W AL)
Checking the oil level
 Turn the wheel hub to the inspection position.
 Remove the screw plug (1), check the oil level and fill with oil if required.
Oil change
 Turn the wheel until the screw plug (1) on the hub is at the bottom.
 Remove the screw plug (1) and the drain plug (3) and catch the oil.
 Flush, if necessary.
 Gently turn the drain plug (3) back in.
 Turn the wheel to the filling and inspection position.
J The inspection mark must be in a level position.
 Fill in oil up to the lower edge of the hole.
 Pour in the oil up to the lower edge of the opening.
 Carefully seal the filler opening (2).