B95W
Operation
07_Bedienung_en.fm - V1.0 - 1.8.17
225 / 306
7
26
All-wheel steering (optional)
The machine has a front and rear axle that are both controlled fully hydraulically.
Notice
In four-wheel steering, only the “slow” travel speed is possible.
Notice
When the display is activated, four-wheel steering only becomes active
when the front axle is in the neutral position. Check the display.
Notice
Switching from 4WS “crab steering” to normal four-wheel steering and back
is only activated if both the front and rear axles are in the neutral position.
Check the display.
Notice
After deselecting four-wheel steering on the display, normal steering is only
activated when the rear axle is in the neutral position. Check the display.
To Next Page
Loading...
