B95W
Safety
03_Sicherheit_en.fm - V 0.1 - 1.8.17
25 / 306
3
46
Servicing and replacing safety signs
The safety of the operator always has to come first.
Safety signs must always be kept in good condition and legible.
Replace any safety signs which have been damaged or have gone missing.
Use mild detergents and water to clean the safety signs.
Do not use any cleansers that contain solvents.
Always specify the machine serial number and language when ordering safety
signs.
Risk of injury
from falling
window
Risk of injury
caused by
incorrect
operations or
maintenance
Secure window Read and
understand the
operator’s
manual
Tipping risk Emergency exit
Activate
overload
warning device.
Read and
understand the
operating
instructions
To Next Page
Loading...
