B95W
Description
05_Beschreibung_en.fm - V1.0 - 1.8.17
79 / 306
5
11
Icons of
machine
functions
Bucket change-over
For the mode to be active, the working hydraulics must be turned on.
Press OK to turn the mode on/off.
Changeover ISO/SAE
For the mode to be active, the working hydraulics must be turned on.
Press OK to turn the mode on/off.
Active icon = operation as per SAE
Inactive icon = operation as per ISO
ECO mode
For the mode to be active, the working hydraulics must be turned on.
• An icon in the main menu will show when the mode is activated. When the
ECO mode is active, the auto-idle and automatic engine shutoff functions are
turned on.
• Equally, when the ECO mode is deactivated, the auto-idle and automatic engine
shutoff functions are turned off.
Press OK to turn the mode on/off.
Auto-idling system
When the function is active it is indicated on the display by an icon.
• If the pressure switches for the working hydraulics do not detect pressure for
more than three seconds, the engine is switched to idle.
• Only when any of the four pressure switches detect pressure is the idle
command retracted.
Press OK to turn the ECO mode on/off.
To Next Page
Loading...
