YASKAWA G7 Series User Manual

Options
6-163
DI-08 Reference Ranges
When using the DI-08, the following ranges can be set depending on the settings of the parameters.
o1-03 F3-01
Switch
S1
Reference Input Mode
Reference Setting
Range
U1-01 Monitor Unit
o1-03 = 0 o1-03 = 1
0 or 1
0
12 bits 3-digit BCD with sign, 1% -110 to 110%
0.01Hz 0.01%
16 bits 4-digit BCD with sign, 1% -110 to 110%
1
12 bits 3-digit BCD with sign, 0.1% -110.0 to 110.0%
16 bits 4-digit BCD with sign, 0.1% -110.0 to 110.0%
2
12 bits 3-digit BCD with sign, 0.01% -15.99 to 15.99%
16 bits 4-digit BCD with sign, 0.01% -110.0 to 110.0%
3
12 bits 3-digit BCD with sign, 1Hz -400 to 400Hz
16 bits 4-digit BCD with sign, 1Hz -400 to 400Hz
4
12 bits 3-digit BCD with sign, 0.1Hz -159.9 to 159.9Hz
16 bits 4-digit BCD with sign, 0.1Hz -400.0 to 400.0Hz
5
12 bits 3-digit BCD with sign, 0.01Hz -15.99 to 15.99Hz
16 bits 4-digit BCD with sign, 0.01Hz -159.99 to 159.99Hz
6 16 bits 5-digit BCD without sign, 0.01Hz 000.00 to 399.98Hz
7
12 bits 12-bit binary with sign, 100%/4095 -4095 to 4095
16 bits 16-bit binary with sign, 100%/30000 -33000 to 33000
2 to 39 -
12 bits 3-digit BCD with sign, 1 rpm -1599 to 1599 rpm 1 rpm
16 bits 4-digit BCD with sign, 1 rpm -15999 to 15999 rpm 1 rpm
40 to
39999
- 12 bits
3-digit BCD with sign, 100%/(1- to 4-
digit setting of o1-03)
-4095 to 4095
5th digit of o1-03 set-
ting:
X = 0, unit: 1
X = 1, unit: 0.1
X = 2, unit: 0.01
X = 3, unit: 0.001
- 16 bits
4-digit BCD with sign, 100%/(1- to 4-
digit setting of o1-03)
-10999 to 10999
(when o1-03 = 9999)
10000
x = 1
to 3
- 16 bits 4-digit BCD with sign, 100%/10000 -11000 to 11000
F3-01 Reference Input Mode Reference Setting Range
U1-01 Monitor Unit
o1-03 = 0 o1-03 = 1
0 2-digit BCD with sign, 1% -110 to 110%
0.01Hz 0.01%
1 2-digit BCD with sign, 0.1% -15.9 to 15.9%
2 2-digit BCD with sign, 0.01% -1.59 to 1.59%
3 2-digit BCD with sign, 1Hz -159 to 159Hz
4 2-digit BCD with sign, 0.1Hz -15.9 to 15.9Hz
5 2-digit BCD with sign, 0.01Hz -1.59 to 1.59Hz
6-
7
12-bit binary with sign, 100%/
4095
-255 to 255
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

YASKAWA G7 Series Specifications

General

Series	G7
Frequency	50/60 Hz
Output Voltage	Matches Input Voltage
Control Method	V/f Control
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Communication	RS-485, Modbus, DeviceNet, Profibus, Ethernet
Safety	Safe Torque Off (STO)
Operating Temperature	-10°C to 50°C
Humidity	5% to 95% (non-condensing)
Cooling Method	Fan Cooled
Enclosure Rating	IP20
Storage Temperature	-20°C to 65°C