YASKAWA U1000 Series - Cable Specifications

3.9 Control Circuit Wiring
Electrical Installation
3
YASKAWA ELECTRIC SIEP C710636 02B YASKAWA U1000 Technical Manual 109
Harmonic Filter Module
Figure 3.48
Figure 3.47 Module Communications Connector Location (Harmonic Filter Module)
■ Cable Specifications
Use a cable packaged with the harmonic filter module to connect with connector CN500.
Table 3.17 Module Communications Connector (CN500) Cable Specifications
■ Precautions when Wiring Module Communications Connector
After inserting the connector, pull the cable gently, and make sure that the connector is securely inserted.
Cable Length Cable Connector Exterior Dimensions
Approximately 5 m Half pitch I/O connector (1.27 mm)
CN500
SIEP_C710636_02B_1_0.book 109 ページ ２０１５年１１月２５日 水曜日 午後４時５６分