B.2 Parameter Groups
YASKAWA ELECTRIC
SIEP C710636 02B YASKAWA U1000 Technical Manual 467
B.2 Parameter Groups
Parameter Group Name Page Parameter Group Name Page
A1 Initialization 468 H2 Multi-Function Digital Outputs 500
A2 User Parameters 469 H3 Multi-Function Analog Inputs 503
b1 Operation Mode Selection 469 H4 Multi-Function Analog Outputs 505
b2 DC Injection Braking 470 H5 MEMOBUS/Modbus Serial Communication 506
b3 Speed Search 470 H6 Pulse Train Input/Output 507
b4 Timer Function 472 L1 Motor Protection 508
b5 PID Control 472 L2 Momentary Power Loss Ride-Thru 508
b6 Dwell Function 474 L3 Stall Prevention 509
b7 Droop Control 474 L4 Speed Detection 510
b8 Energy Saving 474 L5 Fault Restart 511
b9 Zero Servo 475 L6 Torque Detection 511
C1 Acceleration and Deceleration Times 476 L7 Torque Limit 512
C2 S-Curve Characteristics 476 L8 Drive Protection 512
C3 Slip Compensation 477 L9 Drive Protection 2 513
C4 Torque Compensation 478 n1 Hunting Prevention 514
C5 Automatic Speed Regulator (ASR) 478 n2 Speed Feedback Detection Control (AFR) Tuning 514
C6 Carrier Frequency 480 n3 Overexcitation Braking 514
C7 Voltage Adjustment 480 n5 Feed Forward Control 515
d1 Frequency Reference 481 n6 Online Tuning 515
d2 Frequency Upper/Lower Limits 482 n8 PM Motor Control Tuning 515
d3 Jump Frequency 482 o1 Digital Operator Display Selection 517
d4 Frequency Reference Hold and Up/Down 2 Function 482 o2 Digital Operator Keypad Functions 518
d5 Torque Control 483 o3 Copy Function 518
d6 Field Weakening and Field Forcing 483 o4 Maintenance Monitor Settings 518
d7 Offset Frequency 483 q DriveWorksEZ Parameters 519
E1 V/f Pattern for Motor 1 484 r DriveWorksEZ Connection Parameters 519
E2 Motor 1 Parameters 485 T1 Induction Motor Auto-Tuning 519
E3 V/f Pattern for Motor 2 486 T2 PM Motor Auto-Tuning 521
E4 Motor 2 Parameters 486 T3 ASR and Inertia Tuning 522
E5 PM Motor Settings 487 U1 Operation Status Monitors 522
F1
PG Speed Control Card Settings
(PG-B3/PG-F3/PG-RT3/PG-X3)
489
U2 Fault Trace 525
F2 Analog Input Card Settings (AI-A3) 491 U3 Fault History 527
F3 Digital Input Card Settings (DI-A3) 491 U4 Maintenance Monitors 527
F4 Analog Monitor Card Settings (AO-A3) 491 U5 PID Monitors 529
F5 Digital Output Card Settings (DO-A3) 492 U6 Control Monitors 529
F6
Communication Option Card (SI-C3, SI-EM3, SI-EN3,
SI-ET3, SI-N3, SI-P3, SI-S3, SI-T3, and SI-W3)
492
U8 DriveWorksEZ Monitors 531
F7 Communication Option Card (SI-EM3/SI-EN3) 495 U9 Power Monitors 531
H1 Multi-Function Digital Inputs 496
SIEP_C710636_02B_1_0.book 467 ページ ２０１５年１１月２５日 水曜日 午後４時５６分
To Next Page
Loading...
