Glossary of Terms and Concepts
Syntax
Argument
Argument
name
Description of the argument.
[The units in which the argument is defined,
when applicable].
Condition/Variable Code
Lists the codes to be used
when specifying an argument
as a condition (e.g. =, <, >)
or a variable (variable ID
code) when using the serial
communication protocol.
When using XtraWare, simply
select the required option
from a drop-down menu.
Example An example that shows the use of the command.
Example
Explanation
An explanation of the example.
Note Addition information relating to the use of the command.
See Also A list of related commands, variables and parameters.
252 XtraWare User Manual
To Next Page