YASKAWA Z1000 CIMR-ZU*A Series - Understanding Parameter Descriptions; Control Modes, Symbols, and Terms

A.1 Understanding Parameter Descriptions
u
Control Modes, Symbols, and Terms
The table below lists terms and symbols used in this section to indicate parameter availability and control.
Table A.1 Symbols and Icons Used in Parameter Descriptions
Symbol Description
OLV/PMOLV/PM
Parameter is ONLY available when operating the drive with Open Loop Vector for PM motors.
Parameter can be changed during run.
A.1 Understanding Parameter Descriptions
184
YASKAWA SIEP YAIZ1U 03B YASKAWA AC Drive – Z1000 Programming Manual