User Guide for SIP VP-T49G IP Phone
162
2. Enter the desired number.
3. Press , or tap Send.
The # key is configured as a send key by default. You can also set the * key as the send key, or
set neither. For more information, refer to the Key as Send on page 79.
You can also tap History or Directory to search for an entry or contact after picking up the
handset, and then tap the desired entry or contact to place a call.
To place a call using the hands-free speakerphone mode:
Do one of the following:
- With the handset on-hook, press or tap the line key to obtain a dial tone.
Enter the desired number.
Press or tap Send.
- With the handset on-hook, enter the desired number.
Press , or tap Send.
To place a call using the headset:
Do one of the following:
- With the optional headset connected, press to activate the headset mode.
Tap the line key to obtain a dial tone.
Enter the desired number.
Press or tap Send.
- With the optional headset connected, press to activate the headset mode.
Enter the desired number.
Press or tap Send.
Note
To permanently use the headset mode, refer to Headset Prior on page 120.
To Next Page
Loading...
Need help?
General
