Yealink SIP VP-T49G User Manual

User Guide for SIP VP-T49G IP Phone
180
If the phone is not in a video call, the external monitor will display a Yealink logo. Before using
the external monitor, ensure that the external monitor has been connected to your phone. For
more information, refer to Phone Installation on page 33.
Note
The IP phone supports the following video resolutions on both IP phone and external monitor
during the video call (not receive presentations) by default:
Scenario
Resolution
Receive
Send
One-way video call
1920 x 1080
(1080P@30fps)
1920 x 1080
(1080P@30fps)
3-way video conference
1280 x 720
(720P@30fps)
1280 x 720
(720P@30fps)
The IP phone supports the following video and shared contents resolutions on both IP phone
and external monitor during the video call (receive presentations) by default:
Scenario
Resolution
Video
Shared Contents
(Max)
Receive
Send
Receive
One-way video call
1280 x 720
(720P@30fps)
1280 x 720
(720P@30fps)
1920 x 1080
(1080P@15fps)
3-way video conference
1280 x 720
(720P@30fps)
1280 x 720
(720P@30fps)
1920 x 1080
(1080P@15fps)
Note
You can configure the output resolution of the external monitor via web user interface.
To enable the external monitor via phone user interface, do one of the following:
- Tap ->Basic->HDMI.
Tap the EXT Display field.
Tap Enabled in the pop-up dialog box.
Tap the Save soft key.
- Swipe down from the top of the screen to enter the control center and toggle EXT Display
on.
The Extended Display Accessories ED10 is required for connecting the external monitor. You
should purchase it separately. For more information, refer to Yealink Extended Display
Accessories Quick Installation Guide for SIP VP-T49G .
The tables above list the video resolutions between SIP VP-T49G IP phone and Yealink IP phone.

Yealink SIP VP-T49G Specifications

General

Brand	Yealink
Model	SIP VP-T49G
Category	IP Phone
Language	English