Advanced Phone Features
233
interface.
If you enable visual alert feature, you can also pick up the monitored user’s incoming call by
tapping DPickup soft key. To use DPickup soft key to pick up the call, the call pickup code can
only be configured on a global or per-line basis via web user interface.
Note
To configure directed call pickup feature on a global basis via web user interface:
1. Click on Features->Call Pickup.
2. Enter the desired pickup code in the Directed Call Pickup Code field.
3. Click Confirm to accept the change.
To configure the directed call pickup code on a per-line basis via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
The pickup code is used in the following order of preference: Extension (DSSKey->Line
Key)>Directed Call Pickup Code (Account->Advanced)>Directed Call Pickup Code
(Features->Call Pickup). If pickup code is not configured, tapping the BLF key/DPickup soft key
will directly call the monitored user when he/she receives an incoming call.
To Next Page
Loading...
Need help?
General
