Advanced Phone Features
303
3. Tap the desired value in the pop-up dialog box.
4. Tap the Save soft key.
To configure BFCP protocol for Cloud account via web user interface:
1. Click on Account->Cloud Account.
2. Select the desired account from the pull-down list of Account.
3. Select Enabled from the pull-down list of BFCP.
4. Click Confirm to accept the change.
Note
To configure H.239 via phone user interface:
1. Tap ->Advanced (default password: admin) ->VC Account->H.323.
2. Tap the H.239 field.
BFCP for Cloud account is configurable via web user interface only.
To Next Page
Loading...
Need help?
General
