| Phone Network | 25
Permitted Values String within 32 characters
Default Blank
Parameter static.wifi.X.ssid
[2]
<y0000000000xx>.cfg
Description It configures the SSID of a specific wireless network.SSID is a unique identifier for
accessing wireless access points.
Note:It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to 1
(Enabled).
Permitted Values String within 32 characters
Default Blank
Parameter static.wifi.X.priority
[2]
<y0000000000xx>.cfg
Description It configures the priority for a specific wireless network.5 is the highest priority, 1 is
the lowest priority.
Note:It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to 1
(Enabled).
Permitted Values Integer from 1 to 5
Default 1
Parameter static.wifi.X.security_mode
[2]
<y0000000000xx>.cfg
Description It configures the security mode of a specific wireless network.
Note:It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to 1
(Enabled).
Permitted Values NONE, WEP, WPA/WPA2 PSK, 802.1x EAP
Default NONE
Parameter static.wifi.X.cipher_type
[2]
<y0000000000xx>.cfg
Description It configures the encryption type of a specific wireless network.If
"static.wifi.X.security_mode" is set to NONE, the permitted value of this parameter is
NONE.
If "static.wifi.X.security_mode" is set to 802.1x EAP, the permitted values of this
parameter are PEAP, TLS,TTLS or PWD.
Note:It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to 1
(Enabled).
Permitted Values NONE, PEAP, TLS, TTLS, PWD
Default NONE
Parameter static.wifi.X.password
[2]
<y0000000000xx>.cfg
Description It configures the password of a specific wireless network.
Note:It works only if "static.wifi.function.enable" and "static.wifi.enable" are set to 1
(Enabled).
Permitted Values String within 64 characters
Default Blank
To Next Page
Loading...
Need help?
General
