| Phone Customization | 63
Web UI Settings > Time & Date > Time Zone
Parameter local_time.time_zone_name <MAC>.cfg
Description
It configures the time zone name.
Note: It works only if the value of the parameter “local_time.summer_time” is set
to 2 (Automatic) and the parameter “local_time.time_zone” should be configured in
advance.
Permitted Values
String within 32 characters
The available time zone names depend on the time zone configured by the parameter
“local_time.time_zone”. For available time zone names, refer to Time Zone.
Default China(Beijing)
Phone UI
> Settings > Device Settings > Time&Date > General > Location
Web UI Settings > Time & Date > Location
DST Settings
You can set DST for the desired area as required. By default, the DST is set to Automatic, so it can be adjusted
automatically from the current time zone configuration.
The time zone and corresponding DST pre-configurations exist in the AutoDST file. If the DST is set to Automatic,
the phone obtains the DST configuration from the AutoDST file.
You can customize the AutoDST file if required. The AutoDST file allows you to add or modify time zone and DST
settings for your area each year.
•
Auto DST File Customization
•
DST Configuration
Auto DST File Customization
Before customizing, you need to obtain the AutoDST file. You can ask the distributor or Yealink FAE for
DST template. You can also obtain the DST template online: http://support.yealink.com/documentFront/
forwardToDocumentFrontDisplayPage.
•
Auto DST File Attributes
•
Customizing Auto DST File
Auto DST File Attributes
The following table lists description of each attribute in the template file:
Attributes Type Values Description
szTime required [+/-][X]:[Y], X=0~14, Y=0~59 Time Zone
szZone required String (if the content is more
than one city, it is the best to
keep their daylight saving time
the same)
Time Zone name
iType optional
0/1
0: DST by Date
1: DST by Week
DST time type
(This item is needed if you want
to configure DST.)
To Next Page
Loading...
Need help?
General
